CoreCasys Switch P2260 accurately shows which ports are in use and can enable or disable PoE power per port without affecting the whole system. Port-based VLAN blocks broadcast completely — even L2 applications cannot cross VLANs on the P2260. Loop blocking remains available, and port-based QoS lets you limit each AP’s speed when many access points are connected.
Corecasys P2260 offers 24×10/100, 2×10/100/1000 and 2 fiber ports, with PoE as its strongest feature. Precise per-AP power control from the switch greatly reduces customer onsite visits. Unlike cheap APs that use separate PoE injectors (often messy with power plugs), the P2260 can power about 15–18 access points as a PoE switch rated up to 48A. It also provides trunk ports for load-balanced traffic and storm control against flooding packets.
Why you should have a managed switch: 1. Article “The Stream of Bandwidth” 2. VLAN use cases “2-3-4 systems in 1 switch with VLAN”
For full screen, right-click the video, open Zoom, then choose Full Screen.
Unlike many other brands, Corecasys sells products together with after-sales service and the knowledge you need to use our equipment. As a systems integrator (SI), we help you use the product until your requirements are fully met. Our three-week trial policy also proves that after you buy, the equipment must work reliably for you — not create problems and frustration.
Technical Specifications of Corecasys Switch P2260
Standards
IEEE 802.3x Full-duplex and Flow Control
IEEE 802.1p QoS / Class of Service, Priority Protocols
IEEE802.3 Nway Auto-negotiation
IEEE802.3af Power over Ethernet
Features
10/100BaseTX with RJ-45 Connectors: 24 port with PoE
10/100/1000BaseT with RJ-45 Connectors: 2
Transmission Method: Store and Forward
Smart Features
Priority ( Port Based / TOS / Diffserv / DSCP/IPv4 /IPv6 )
Class of Service Configuration
On / Off PoE Port Settings,
Trunk ( up to 4 Ports per Group, 2 Groups per Device )
Quality of Service: up to 2 queues