CorecasysCorecasys

CORECASYS SWITCH P2080

PoE Switch 8 Ports

Corecasys Switch P2080

A Corecasys switch delivers the most value as the core for all other switches. Uplink smaller switches to it so loops between them can be blocked, and allocate bandwidth appropriately when servers are connected. Corecasys P2080 has 8×10/100 PoE ports (802.3af) — compact yet stable power delivery — with effective Layer-4 QoS, trunk ports for load-balanced traffic, and storm control against flooding packets.

Why you should have a managed switch in your network

Unlike many other brands, Corecasys sells products together with after-sales service and the knowledge you need to use our equipment. As a systems integrator (SI), we help you use the product until your requirements are fully met. Our three-week trial policy also proves that after you buy, the equipment must work reliably for you — not create problems and frustration.

Technical Specifications

Technical Specifications of VigorSwitch P2260
Interface 24 x 10/100Mbps Ports, RJ-45
2 x SFP/ Gigabit Dual-media Ports
1 x Console Port
1 x Restart Button
1 x Ledset Button
Standard Compliance IEEE 802.3 10Based-T Ethernet
IEEE 802.3u 100Based-TX Ethernet
IEEE 802.3ab 1000Based-TX Ethernet
IEEE 802.3z 1000Based-TX/FX Ethernet
IEEE 802.3x Flow Control Capability
IEEE 802.1q VLAN
IEEE 802.1p QoS
Performance Switching Capacity 24 Fast Ethernet Ports+2 Gigabit Ethernet Port with Non-blocking Wise Speed Performance
8K MAC Address
256K Packet Buffer and 128K Control Memory
Multicast / Broadband / Unknown-unicat Storm Suppression
Port Mirroring
VLAN Port-base VLAN
IEEE 802.1q Tag-base VLAN, Maximum 4K, up to 256 Active VLANs
Q-in-Q is an Efficient Method for Enabling Subscriber Aggregation
VSM Up to 16 Switches Can be Managed via Single IP
Virtual Stacking, No Extra Stacking Hardware and Physical Central Wiring Closet are Needed
QoS Port Based, 802.1p, TOS and Diffserv Based QoS Packet Classification
Supports 4 Level Priority Queues to Prioritize In-bound and Out-bound Traffic
Supports Two Scheduling, WRR and Strict
Supports Priority in a Q-in-Q Tag
Isolated Group Provide One Group Allows Certain Ports to be Designated as Protected
Ingress / Egress Rate Limite 1~24 Ports : 1K up to 100Mbps
25, 26 Ports : 1K up to 1000Mbps
Protocol LACP 2 Fast Ethernet +1 Gigabit Ethernet Groups
Per-group max 4 Member
Provides DA, SA and DA+SA MAC-based trunking with automatic link fail-over
GVRP / GARP IEEE 802.1q with GVRP / GARP
Multicasting Supports IGMP Snooping Including Active and Passive Modes
STP / RSTP IEEE 802.1d / IEEE 802.1w
Network Security IEEE 802.1x Access Control
Isolated Group
Restricate Group
Management Access Policy Control
SNMPv1, v2C Network Management RFC 1213 MIB (MIB-II) Interface MIB
Address Translation MIB
IP MIB
ICMP MIB
TCP MIB
UDP MIB
SNMP MIB
RFC 1757 RMON MIB Statistics Group 1
History Group 2
Alarm Group 3
Event Group 9
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
Enterprise MIB
POE Specification 24-ports IEEE802.3af POE PSE
Endpoint with 48VDC Power through RJ-45 pin 1,2,3,6
POE Activity LED Indicator
185 Watts of Total Power (up to 15.4 Watts per 10/100 Port)
Auto Detect Powered Device and Consumption Levels
Supports per Port Power Consumption Monitoring
Smart Feature for PD on/off, PD Detection, Power Level, PD status and Power feeding Priority
Circuit Protection to Prevent Power Interference between Ports
Supports per Port POE State Setting
Supports per Port Power priority Setting
Operation Voltage 100-240 V
Consumption 12W
Weight 3.3Kg
Dimensions 209 x 442 x 44 mm
Warranty 2 Year Limited

Download Datasheet Click Here.